Classification Of The Warnings; Emergency Information; Product Description - Abicor Binzel AutoGuide Plus Instructions D'assemblage

3 Product description

2.4 Classification of the warnings

The warnings used in the operating instructions are divided into four different levels and shown prior to potentially dangerous
work steps. Arranged in descending order of importance, they have the following meanings:
DANGER
Describes an imminent threatening danger. If not avoided, this will result in fatal or extremely critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, this may result in slight or minor injuries.
NOTICE
Describes the risk of impairing work results or potential material damage to the equipment.

2.5 Emergency information

In the event of an emergency, immediately disconnect the following supplies:
• Electrical power supply
Further measures are determined by the integration of the entire system.
3 Product description
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert and modify the device to enhance its performance without authorization.
• Only qualified personnel are permitted to perform work on the device or system.
The AutoGuide Plus system is designed to be integrated into a higher-level control system.
A circuit breaker, as defined by Performance Level C, must be available to disrupt the energy supply, if the emergency off
switch is pressed or if the welding system is switched off.
The welding equipment shown is illustrative and equipped with the MIG/TIG torch/ABICOR BINZEL accessories;
it is not included in the scope of supply. Equipment made by other manufacturers can be integrated upon consultation.
EN - 4
AutoGuide Plus
MON.0016.0 • 2021-02-05