Publicité
2.8 ABB Connected Services (ABB Ability)
The OmniCore™ controller hardware is delivered with a standard mobile connection
(Cellular data connection), or WIFI modem and/or Ethernet connection.
Cellular data connection
If the ABB Connected Services™ OmniCore™ controller hardware is delivered
together with a standard, free of charge (machine-to-machine or M2M) cellular data
connection, it will automatically establish a connection to the ABB Connected
Services™ digital platform once the power switch of the ABB Connected Services™
OmniCore™ controller hardware has been turned on and has been connected.
After the establishment of the connection there will be a data flow from the
OmniCore™ controller hardware to the ABB Connected Services™ digital platform.
ABB does not warrant or guarantee an available, stable, uninterrupted, and
interference free connection through the standard cellular data connection. This
is dependent on the availability and quality of the cellular data signal as provided
by the telecommunications carrier on the location where the ABB Connected
Services™ OmniCore™ hardware is installed. The cellular data connection is to
be used solely in connection with the ABB Connected Services™ OmniCore™
controller hardware and excludes, without limitation, voice services, web browsing,
music downloading and other services that are not traditionally considered as
machine to machine (M2M), but human-oriented telecommunication services.
ABB has established and maintains a formal information and cybersecurity
procedures which includes commercially reasonable technical and organizational
measures, in order to protect the data against security breaches, accidental or
unlawful destruction, loss, alteration, and unauthorized disclosure of, or access to
the data.
The cellular data connection is not required for the operation of the hardware and
the connectivity settings can be adjusted and turned off at any given time. Detailed
information on the mobile connection is further described in the service description
that can be downloaded from the following web location:
https://share.library.abb.com/api/v4?cid=9AAC910011&dk=Manual
Manuel du produit - OmniCore V250XT Type B
3HAC087112-004 Révision: C
Remarque
Le contenu de cette section est uniquement disponible en anglais.
Remarque
ABB Connected Services est le nouveau nom de la fonctionnalité précédemment
connue sous le nom de ABB Ability. Pendant un certain temps, les deux noms
apparaîtront dans et sur nos produits.
© Copyright 2023-2024- ABB. Tous droits réservés.
2 Description du système de commande
2.8 ABB Connected Services (ABB Ability)
Suite page suivante
55
Publicité
