Publicité
EN-56
4.6.3 Input/Output (I/O) Setup
The I/O's setup can be customized for various user preferences.
The I/O's setup is defined below (defaults in Bold).
Item
Enable
Discrete Input 1
Discrete Input 2
Discrete Output 1
Discrete Output 2
Discrete Output 3
Discrete Output 4
Note: The I/O's setup will only work when the I/O Option board has been installed. See the Accessory
list in section 9.2 for information. The option I/O board provides two isolated inputs and four dry-contact
normally open relay outputs which can be used for simple process weighing.
Press the button
Menu.
With the button corresponding to the icon
go down the list and highlight Application
Mode. Enter this sub-menu by pressing the
Softkey corresponding to the icon
In the Application Mode menu enter the sub-
menu Filling.
Select the list item and press the Softkey
corresponding to the icon
the setting as desired. After completion of I/O
Setup, press the Softkey corresponding to the
icon
screen.
Find Quality Products Online at:
Available Settings
On, Off
Off, Zero, Tare, Clear Tare, Print, Start/Stop, Pause/Continue
Off, Zero, Tare, Clear Tare, Print, Start/Stop, Pause/Continue
Off, SP1, SP2, SP3, SP4, Alarm, Zero
Off, SP1, SP2, SP3, SP4, Alarm, Zero
Off, SP1, SP2, SP3, SP4, Alarm, Zero
Off, SP1, SP2, SP3, SP4, Alarm, Zero
to enter the Main
.
icon to change
to return to the main application
GlobalTestSupply
www.
Defender 5000 Indicators
,
.com
sales@GlobalTestSupply.com
Publicité
