Publicité
EN-32
3.9.2.3 Auto On Accept
If Auto On Accept is selected and the weighing mode is Check, values will be printed when the weight
is accepted.
3.9.2.4 Interval
If Interval is selected, the sub-menu Time will display.
The time interval can be set through the numeric keypad.
Settings of 1 to 3600 seconds are available. Default is 1.
Printing occurs at the defined time interval.
3.9.2.5 MT-Continuous
If MT-Continuous is selected, the print output will be in the MT-Continuous format.
Note: Refer to Appendix A for MT-Continuous format.
3.9.2.6 OH-Continuous
If OH-Continuous is selected, the print output will be in the OH-Continuous format.
The submenu Linkto will appear. The value of the Linkto can be set from Off/Simple/Custom
1/Custom 2/Custom 3/Custom 4/Zebra.
Note: Refer to Section 5.5 for OH-Continuous format. If the template output is more than 100
characters, the printout will be forced to 1 per second.
3.9.2.7 ST-Continuous
If the ST-Continuous is selected, the output will be in ST-Continuous format.
3.9.2.8 SICS
If SICS is selected, the print output will be in MT-SICS command.
Note: Refer to Appendix B for SICS commands.
3.9.2.9 3835
If 3835 is selected, the output will be in 3835 format. Please refer to Appendix C for details.
3.9.2.10 Reference Balance
If Reference Balance is selected, RS232 interface is used to connect to reference balance.
Note: Use a reference balance to perform sampling with a high resolution balance in Counting Mode.
Please make sure the balance is already switched on before connected to the TD52 indicator.
3.9.2.11 Print Option
Set the way to print.
SF40A = print the result through the SF40A printer.
PC
ZEBRA = print the result through the Zebra printer.
3.9.2.12 Print Cal Data
Set the automatic Calibration Data printing functionality.
Find Quality Products Online at:
ACCEPT = printing occurs each time the display is within the Checkweigh accept
range and stability criteria are met.
INTERVAL = printing occurs at the defined time interval.
CONTINUOUS = printing occurs continuously.
CONTINUOUS = printing occurs continuously.
= transfer the result to a computer.
OFF
= disabled
ON
= enabled
GlobalTestSupply
www.
Checksum
Off = disabled
On = enabled
.com
Defender 5000 Indicators
sales@GlobalTestSupply.com
Publicité
