Publicité
Defender 5000 Indicators
4.1.4 ID Input
Press Softkey corresponding to the icon
enter configuration screen.
User can press alphanumeric keys to input the ID
number. Then press the Softkey corresponding to
the icon
4.1.5 Expand x10
This icon toggles the weight display between
standard and expanded mode. When this icon is
selected, the appearance of the expanded display
differs, depending on whether or not the indicator
is approved:
Non-Approved Mode An extra digit of resolution is added to the main weight display (e.g.
Approved Mode
4.1.6 Input/Output (I/O) Setup
The I/O's setup can be customized for various user preferences.
The I/O's setup is defined below (defaults in Bold).
Item
Enable
Discrete Input 1
Discrete Input 2
Discrete Output 1
Discrete Output 2
Discrete Output 3
Discrete Output 4
Note: The I/O's will only work when the I/O Option Board has been installed. See the Accessory list
in section 9.2 for information.
The option I/O board provides two isolated inputs and four dry-contact normally open relay outputs
which can be used for simple process weighing.
Press the button
With the button corresponding to the icon
down the list and highlight Application Mode.
Enter this sub-menu by pressing the button
corresponding to the icon
In the Application Mode menu enter the Weighing
sub-menu.
Find Quality Products Online at:
to confirm the input.
123.45 becomes 123.456).
The PRINT function prints weights in the expanded format.
An extra digit of resolution is added to the main weight display temporarily
(about 5 seconds).
The PRINT function is disabled when weight display expanded.
Available Settings
On, Off
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Off, Overload, Underload, Zero
Off, Overload, Underload, Zero
Off, Overload, Underload, Zero
Off, Overload, Underload, Zero
to enter the Main Menu.
.
GlobalTestSupply
www.
to
, go
.com
EN-39
sales@GlobalTestSupply.com
Publicité
