Publicité
Defender 5000 Indicators
3.4.7 Power On Unit
Set the unit that will be displayed at Power On.
Automatic
g
kg
lb
oz
lb:oz
t (Metric Tonne)
ton (Short Ton)
3.4.8 Key Beep
Set how the beeper sounds when a key is pressed.
Off = no sound
On = sound
3.4.9 Transaction Counter
The transaction counter is a seven-digit counter that tracks the total transactions. When the value
reaches 9,999,999, the next transaction causes a roll-over to 0000001.
Off = the transaction counter will not increase.
On = the transaction counter will increase with the additional menu item Next Transaction
NOTE: If the transaction counter is set to be ON, the count number will increase when press print
key.
3.4.9.1 Next Transaction
The value of the next transaction displays in the Next Transaction field.
3.4.10 I/O Type
Set the status of the relay output.
Open = The initial state of the relay output is normally open.
Closed = The initial state of the relay output is normally closed.
3.4.11 Input 1 Trigger
Set the Input 1 trigger signal.
Push = each push will trigger input once.
Push and release = push and hold will trigger input once, release will trigger input again.
Application scenarios: Press and hold -> Pause; Release -> Resume.
3.4.12 Input 2 Trigger
Set the Input 2 trigger signal.
Push = each push will trigger input once.
Push and release = push and hold will trigger input once, release will trigger input again.
Application scenarios: Press and hold -> Pause; Release -> Resume.
3.4.13 Reset
Reset the Setup menu to the factory defaults (except Range, Capacity and Graduation).
No = not reset.
Yes = reset.
NOTE: If the Security Switch is set to ON, the Capacity Unit, Range, Capacity, Graduation and Power
On Zero settings are not reset.
Find Quality Products Online at:
available.
GlobalTestSupply
www.
EN-23
.com
sales@GlobalTestSupply.com
Publicité
