Publicité
EN-44
Defining Over/Under Limits
Press the button Edit Limit to define the limit for
weighing.
Select Over or Under Limit and press the button
corresponding to the icon
4.3.1.1 Configuration
Press soft key "Configure" to enter configuration screen.
The Check Weighing Configurations are defined below (defaults in Bold).
Configure Item
Check Mode
Check Zero
Auto Tare
Accumulate
Audible Signal
Find Quality Products Online at:
to edit the value.
Option(Bold is default)
Check Weighting/ Check
Counting
Off/On
Off/On/Accept
Off/Manual/Automatic
Off/Under and
Over/Accept/Under/Over
GlobalTestSupply
www.
Defender 5000 Indicators
Description
Check weighing mode
Check counting mode
Off: Zero is not part of check range.
On: Zero is part of check range.
Off: Auto tare is turned off.
On: The first stable weight (>=5d) will be tared as a
container automatically.
Accept: If the object weight is in the range of the Over and
Under Limit you set, auto tare will be performed.
Off: The icon "∑" does not display.
Manual: The icon "∑" displays. User can press the key to
accumulate the stable weight.
Automatic: The icon "∑" displays. The weight will be
accumulated automatically.
Note:
The load to be accumulated has to be >= 10d and the
next accumulation can only start once the pan has been
cleared.
no such limit when LFT is OFF or
When LFT is ON(
the approve mod is OIML)
,
a. gross weight and net weight cannot be accumulated;
b. gross 0 has to be reached before a new sample
accumulation.
When LFT is OFF,
a. gross weight and net weight can be accumulated;
b. a new sample can be accumulated after reaching gross
0 or net 0.
Off: No beep.
Under and Over/Accept/Under/Over: Beep when reaching
the selected check point.
.com
sales@GlobalTestSupply.com
Publicité
