Publicité
Defender 5000 Indicators
Repeat the step above to set values for SP2,
SP3 and SP4. When you finish, press the
Softkey corresponding to the icon
confirm and exit the sub-menu.
4.6.2 Application Setup
The Application can be customized for various user preferences.
Press the Softkey corresponding to the icon
Select the list item and press the Softkey
corresponding to the icon
settings as desired.
To return to the Application home screen, press
the Softkey corresponding to the icon
The Filling Configurations are defined below (defaults in Bold).
Configure Item
Auto Tare
Accumulate
Note: please refer to 4.1.3 Accumulation in Weighing section for how to perform accumulation.
Find Quality Products Online at:
.
to enter Configuration
to change the
Option(Bold is default)
Off/On
Off/Manual/Automatic
GlobalTestSupply
www.
to
.
Description
Off: Auto tare is turned off.
On: The first stable weight (>=5d) will be tared as a
container automatically.
Off: The Softkey "∑" doesn't display.
Manual: The Softkey "∑" displays. User can press
the key to accumulate the stable weight.
Automatic: The Softkey "∑" displays. The weight
will be accumulated automatically.
Note:
The load to be accumulated has to be >= 5d and
the next accumulation can only start once the pan
has been cleared.
When LFT is ON (no such limit when LFT is OFF
or the approved model is OIML),
a. gross weight and net weight cannot be
accumulated;
b. gross 0 has to be reached before a new sample
accumulation.
When LFT is OFF,
a. gross weight and net weight can be accumulated
at the same time;
b. a new sample can be accumulated after
reaching gross 0 or net 0.
.com
EN-55
sales@GlobalTestSupply.com
Publicité
