Publicité
Defender 5000 Indicators
4.1.2 Tare
4.1.2.1 Manual Tare
To tare manually, you can do the steps that follow.
1.
2.
3.
NOTE: You can check the value of the tare weight by long pressing the button "T".
4.1.2.2 Manual Preset Tare
There are two methods to preset the tare values. Refer to the steps below, you will know
how to preset the tare values.
• Presetting the tare values without the library:
1.
2.
3.
• Presetting the tare values with the library:
1.
2.
3.
4.1.2.3 Auto Tare
Set the automatic tare.
Off: Auto tare is turned off.
On: The first stable weight (>=5d) will be tare as
a container automatically.
Note: If the Security Switch is set to ON, Auto
Tare is locked at the current setting.
4.1.2.4 Removing the Preset Tare Values
If the tare values are already in the scale, you have two methods to remove the preset tare
values.
• Removing the preset tare values with the button "T"
1.
2.
3.
• Removing the preset tare values with the button
1.
2.
Find Quality Products Online at:
Put the container on the scale.
Press the button "T" to tare. If the scale performs well, you can see the value on the screen is 0.
Put the weighed object with the container on the scale to read the value of the object.
Input the required tare value with the numeric function on the keypad.
Press the button "T" to tare. If the scale performs well, you can see the value on the screen
is minus.
Put the weighed object with the container on the scale to read the value of the object.
Press the button "Library Mode". And you can see the information of the PNs is on the screen.
Select the correct PN with the keys
you want is not on the screen, you can do the steps that follow:
a)
Press the key
to create a new item.
b)
Input the PN, name and tare value with the keypad.
c)
Press the key
to confirm. And you can see the new item is in the library now.
d)
Select the correct PN with the keys
the scale performs well, you can see the value on the screen is minus.
Put the weighed object with the container on the scale to read the value of the object.
Remove the object and the container from the scale.
Press the
button "T".
Select the key
to confirm. If the preset tare value is removed successfully, you
can see the value on the screen is 0 now.
Remove the object and the container from the scale.
Press the button
. If the preset tare value is removed successfully, you can see the
value on the screen is 0 now.
GlobalTestSupply
www.
and
, then press the key
and
, then press the key
.com
EN-37
to confirm. If the PN
to confirm. If
sales@GlobalTestSupply.com
Publicité
