Publicité
EN-36
4. OPERATION
The scale can be configured to operate in up to 5 Application modes (Scale can be set to have 1 or
more Applications modes active). Press the button Mode to select an activated application. The
current application will be shown in the upper left corner of the home screen.
TD52 Indicator incorporates the following Applications:
Weighing
4.1 Weighing
Use this application to determine the weight of items in the selected unit of measure.
Press the button
corresponding to Weighing is displayed in the
screen (this application is the default).
Press Tare or Zero if necessary to begin.
Place objects on the pan to display the weight.
When the reading is stable, the * appears.
The resulting value is displayed in the screen in the
active unit of measure.
4.1.1 Application Setup
The Application can be customized for various user preferences.
Press the button corresponding to the icon
The Configuration screen is now displayed.
Select the list item and press the Softkey corresponding
to the icon
To return to the Application home screen, press the
Softkey corresponding to the icon
The Weighing Configurations are defined below (defaults in Bold)
Item
Auto Tare
Accumulate
Find Quality Products Online at:
Counting
Weighing/Counting
until the icon
to change the setting as desired.
.
Available Settings
Comments
On, Off
To enable Automatic Tare
Off , Automatic, Manual
To enable Accumulation / Totalization
GlobalTestSupply
www.
Defender 5000 Indicators
Check
Percent
.
to enter Configuration
.com
Dynamic
sales@GlobalTestSupply.com
Publicité
