Publicité
Defender 5000 Indicators
4.3.2 Check Counting
Press the configuration button
Check Mode to Check Counting. Place objects on
the pan. The Under/Accept/Over status is shown
in the progress bar area while the actual number
of pieces is shown on the main Display Line.
Set the Average Piece Weight (APW)
Note: It is recommended that the APW is larger than 1d. If APW is between 0.05d and 1d, a warning
message will be displayed and the information line will show 'APW is low!'. If APW is less than
0.05d, an error message will appear and the APW value cannot be stored.
There are three methods to set the APW, see section 4.2.2 for instructions.
Defining Over/Under Limits
Press the button Edit Limit to define the limit for
counting.
Note: See section 4.3.1 for information on how to
set the Over/Under limits.
4.3.3 Application Setup
The Application can be customized for various user preferences.
Press the Softkey corresponding to the icon
The Configuration Menu is now displayed.
Select the list item and press the Softkey
corresponding to the icon
setting as desired.
To return to the Application home screen, press
the button corresponding to the icon
Find Quality Products Online at:
to enter Configuration Setup
,
to change the
GlobalTestSupply
www.
and select
.
.
EN-45
.com
sales@GlobalTestSupply.com
Publicité
