Publicité
EN-26
3.6 Discrete I/O
Long press the button
Menu.
Select Application Mode by pressing the Softkey
corresponding to the icon
Press the Softkey corresponding to the icon
enter the sub-menu Application Mode.
Enable
The current selected application mode can't be set Off.
Discrete I/O setup menus allow the configuration of 2 inputs and 4 outputs depending on different
application mode.
Reset
If Reset is selected and confirmed, all the submenu value will be set to default.
For more details, see the table below.
Application Mode
& Discrete I/O
Weighing
Counting
Check
Percent
Dynamic
Find Quality Products Online at:
to enter the Main
.
to
Options (bold is default)
On, Off
Enable
Discrete Input1
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input2
Discrete Output1
Off, Overload, Underload, Zero
Discrete Output2
Off, Overload, Underload, Zero
Discrete Output3
Off, Overload, Underload, Zero
Discrete Output4
Off, Overload, Underload, Zero
Enable
On, Off
Discrete Input1
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input2
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output1
Off, Overload, Underload, Zero
Off, Overload, Underload, Zero
Discrete Output2
Discrete Output3
Off, Overload, Underload, Zero
Off, Overload, Underload, Zero
Discrete Output4
Enable
On, Off
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input1
Discrete Input2
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Off, Under, Over, Accept, Under/Over, Overload,
Discrete Output1
Underload, Zero
Off, Under, Over, Accept, Under/Over, Overload,
Discrete Output2
Underload, Zero
Off, Under, Over, Accept, Under/Over, Overload,
Discrete Output3
Underload, Zero
Off, Under, Over, Accept, Under/Over, Overload,
Discrete Output4
Underload, Zero
Enable
On, Off
Enable
On, Off
Discrete Input1
Off, Zero, Tare, Clear Tare, Print, Start, Reset
GlobalTestSupply
www.
Defender 5000 Indicators
.com
sales@GlobalTestSupply.com
Publicité
