Publicité
EN-14
Defender 5000 Indicators
2.3.4 MICRO SD Card Installation
The SD memory card can be used for additional storage in the Checkweighing and Counting
applications. Figure 2-5 shows the installation of an SD card into the socket on the edge of the
TD52P and TD52XW main boards.
Figure 2-5 Sliding an SD Card into the SD Socket (left); SD Card Installed (right)
2.4 TD52XW Rear Housing Orientation
The TD52XW is delivered in the wall mount orientation with the connections exiting below the
display. The rear housing may be reversed so the connections exit above the display when the
TD52XW is placed horizontally on a bench. To reverse the rear housing, remove the four Phillips
head screws, carefully rotate the housing 180°, and reinstall the screws.
Figure 2-6
Wall Mount Configuration
Figure 2-7
Bench Top Configuration
2.5 Mounting Bracket
Attach the bracket to a wall or table using fasteners (not supplied) that are appropriate for the type of
mounting surface. The bracket will accommodate up to 6 mm (1/4") diameter screws. Locate the
mounting holes as shown in Figure 2-8.
Figure 2-8
Mounting Bracket Dimensions
GlobalTestSupply
www.
.com
Find Quality Products Online at:
sales@GlobalTestSupply.com
Publicité
