Publicité
DRAIN
This function easily drains exceeding liquids from the steam system. Proceed as follows:
1.
From the Cleaning carousel, scroll until you reach Drain. If you press on the function, a pop-
up message will appear. Press
2.
If the Steam Tank is missing or open, you will be asked to insert/close it. If it is full, you will
have to empty it first, then insert it again.
3.
The draining process starts. When the process ends, you will be asked to empty the tank.
NOTE:
If the Steam Tank is not emptied,
to proceed, or press "OK" to go back.
will stay at the bottom left corner of the display.
EN 55
Publicité
