ResMed Stellar Serie Guide De L'utilisateur page 23

Notes:
• Press
for at least three seconds during mask-fit to start the treatment immediately.
• The mask-fitting feature is disabled when the mask type Trach is selected.
• Availability of this feature is country dependent.
Using the menus
The device has three menus (Monitoring, Setup, Info) accessed by the equivalent buttons
on the right of the LCD screen. In each menu there are screens that display settings, device
or therapy information.
Treatment
Monitoring
Pressure / Flow
Min Vent/Resp Rate
or MV/Va (iVAPS
Mode)
Leak
Tidal Volume
Synchronisation
Oximetry
Note: iVAPS mode is only available in Stellar 150.
Clinical Settings
Alarm Settings
Options
Event Summary
Leak
Minute Ventilation
Tidal Volume
Respiratory Rate
I:E Ratio
Pressure Support
AHI
SpO 2
Used Hours
Device Information
Reminder
Using the menus 17