ResMed Stellar Serie Guide De L'utilisateur page 15

To add supplemental oxygen
1
Unlock the low flow oxygen inlet on the back of the device by pushing up on the locking
clip.
2
Insert one end of the oxygen supply tubing into the oxygen connector port. The tubing
automatically locks into place.
3
Attach the other end of the oxygen supply tubing to the oxygen supply.
4
Start ventilation.
5
Turn on the oxygen source and adjust to the desired flow rate.
1
To remove supplemental oxygen
Before you remove supplemental oxygen from the device, ensure the oxygen supply has
been turned off.
1
Unlock the low flow oxygen inlet on the back of the device by pushing up on the locking
clip.
2
Remove the oxygen supply tubing from the oxygen connector port.
1
2
2
Working with other optional accessories 9