Publicité
22 | Get to know your hearing aids
Hear Clear Receiver Wax Guards Replacement
(Customs & RICs)
1. Insert the empty end of the application stick straight
into the used wax guard of your hearing aid. Push firmly.
2. Pull the application stick straight out to remove the
used wax guard. Do not twist.
3. Use the opposite end of the application stick to insert the
new wax guard straight into the hearing aid. Push firmly.
4. Pull straight out to remove the application stick.
Do not twist. Discard the application stick.
1
2
Service and Repair
If, for any reason, your hearing aid does not operate properly,
do NOT attempt to fix it yourself. Not only are you likely
to violate any applicable warranties or insurance, but you
could also easily cause further damage. Contact your hearing
professional for advice and assistance.
3
4
Multiflex Tinnitus (If enabled):
The Multiflex Tinnitus Technology is a software that generates
noise that can optionally periodically fluctuate in amplitude
and frequency to provide relief for patients suffering from
tinnitus.
When enabled, the Multiflex Tinnitus Technology allows
a hearing professional to design and program appropriate
settings for an individual prescribed a sound treatment plan,
which should be used in a tinnitus management program for
relief of tinnitus.
These characteristics are adjustable by the hearing
professional and are specific to the prescribed therapy
designed by the professional for the patient's needs and
comfort. Patients may have some control of the level or
volume of the signal based on his or her comfort level, but
should refer to their hearing professional for more details.
Get to know your hearing aids | 23
Publicité
