Publicité
Caring for your Electronic Dartboard
1.
Never use metal tipped darts on this dartboard. Metal tipped darts will
seriously damage the circuitry and electronic operation of this dartboard.
2. Do not use excessive force when throwing darts. Throwing darts too hard
will cause frequent tip breakage and cause excess wear on the board.
3. Turn darts clockwise as you pull them from the board. This makes it easier
to remove darts and extends the life of the tips.
4. Use only the A/C adapter that comes with the dartboard. Using the wrong
adapter may cause electrical shock and damage to the electronic circuits.
5. Do not spill liquids on the dartboard. Do not use spray cleaners, or cleaners
that contain ammonia or other harsh chemicals as they may cause damage.
Important Notes
Stuck Segment:
Occasionally, a dart will cause a segment to become wedged within the seg-
ment separator web. If this happens, all games will be suspended and the LCD
display will indicate the segment number that is stuck.
To free the segment, simply remove the dart or broken tip from the segment.
If the problem is still not solved, try wiggling the segment until it is loose. The
game will then resume where it left off.
Broken Tips:
From time to time a tip will break off and become stuck in the segment. Try to
remove it with a pair of pliers or tweezers by grasping the exposed end and
pulling it out of the segment. If this is not possible, you can attempt to push the
tip through to the back of the segment. Use a nail that is smaller than the hole
and gently push the tip until it falls through the other side. Be careful not to push
too far and damage the circuitry behind the segment. Don't be alarmed if tips
break. This is a normal occurrence when playing soft tip darts. We included a
pack of replacement tips which should keep you supplied for quite some time.
When replacing tips, make sure you use the same type of tips that come with
this dartboard.
GB
18
Publicité
