Publicité
Sale package consist of:
1 x Electronic dartboard
1 x AC power adaptor
1 x mounting kit set
12 x soft darts
100 x spare soft tips
1 x dart toe-line sticker
Mounting:
Choose a location to hang the dartboard where is about 3.04m of open space
in front of the board. The "toe-line" should be 2.37m from the face of the dart-
board. Since this dartboard is powered with an AC adapter, you should mount
it close to an electronic outlet for convenience. No matter the dartboard has
horizontal or vertical hang hole(s), the center of bullseye should be 1.73m from
the ground. Mark the center location on the wall. Measure the distance between
hang hole(s) and center on the dartboard. Then, make the mark(s) for hang
hole(s) on the wall base
on the measured dis-
tance. Make sure the
second mark for hang
hole is level with the
dartboard on the wall
by lining up the hang
holes on the back with
the screws. It may be
necessary to adjust the
screws until the board
wall. If you want to
mount
the
dartboard
even more securely to
the wall, you can fas-
ten four extra screws
(not included) through
the holes located in
the catch ring area (the
area outside the scoring
segments).
Dartboard
1.73m From Floor to
center of Bullseye
2.37m
Toe Line
GB
2
Publicité
