Visual Check On The Roundness Of The Wheel - Mondolfo Ferro MT2450 Manuel D'utilisation

key and the
- press the and
- press key to make the selection.
If the presetting is not confirmed within about three seconds, the system automatically
exits from the functions programs environment.
- When this program is selected the system displays:
• the message RPA on the left-hand display;
• the message ON or OFF on the right-hand display;
- The key can be pressed to activate and deactivate automatic search for the
weight application position.
- If the user selects:
• ON automatic position search is enabled;
• OFF automatic position search if disabled.
- Confirm the program setting by pressing the
VISUAL CHECK ON THE ROUNDNESS OF
This function allows the wheel to be started up at low speed with the guard open. This
makes it possible to perform a visual check for any geometrical irregularities of the rim
and the wheel.
The visual checking function is activated by keeping the START key pressed with the
guard raised for at least two seconds.
The START key must be kept pressed for all the time necessary to make the check on
the wheel or rim.
The balancing machine will lock the wheel as soon as the key is released.
MT 2450 operator's manual
key;
keys to preselect function program N° 90 (RPA);
THE WHEEL
key.
GB
79