Publicité
EN
Make sure the handle is in the upright position and locked in place, push the handle lock button and locate handle in correct position.
Storage and Transport mode option 1
1
To put the machine into storage mode start with the handle locked in the upright position and the floor-tool down (1), pull the handle
backwards until the floor-tool moves up and the transport wheels click out into position the front support wheel is deployed (2).
Rest the machine back onto the transport wheels (3).
(no button or lever action is required). Note: Do not let go of the handle.
Storage and Transport mode option 2
4
A
To raise the floor-tool use the toecap locations to the rear of the floor-tool and lift up (A). To raise the machine deck off the ground.
Stand behind the machine, grip the handle. With your right foot push the right pedal down (B) while pulling the machine backwards until
the storage wheels click into position and the front support wheel extends.
!
MAKE SURE THE HANDLE IS LOCKED IN THE UPRIGHT POSITION
Storage and Transport
2
5
BEFORE LETTING GO OF THE HANDLE.
33
33
3
B
6
Handle lock
button
!
Publicité
