Publicité
EN
Clean water tank removal and filling
1
After lifting onto a suitable work surface,
tilt the tank assembly slightly forward and
slide your hand under the tank.
4
Remove the clean water tank from the main body of the tank holder (4&5). To fill remove the rubber stop from the filling neck.
Note: There is a T piece keeping the rubber stop from being completely removed.
7
Pour in the chemical (follow chemical manufactures dilution rates). Only fill the tank to the MAX fill line with clean water using a tap,
hose or suitable water container. DO NOT OVER FILL. Slide the tank back into the main tank body, make sure the front of the clean
water tank is lifted to enter the recess (A).
Push the tank all the way in until you hear it click, make sure it is securely fitted before fitting the tank assembly back on the machine.
Quick Set-up Guide
2
Over head cut away view
Slide your hand under the tank and curl
your fingers up in the space in front of the
tank, use your fingers to pop the tank out.
5
8
21
21
3
Over head cut away view
Remove the clean water tank from the
main body of the tank holder.
6
9
A
Publicité
