Publicité
Les langues disponibles
Les langues disponibles
3. Press the [ENT/MENU] key to store the new setting.
4. Press the [CLR/
9.3.6 CONTRAST
The contrast may be adjusted in 30 levels.
Press and hold [ ENT/MENU ] "CONFIG" "CONTRAST"
1.
2. Press the [▲] or [▼] key to select the de-
sired level. The contrast level can be set
from "1" to "30" ( "15" is default ) .
3. Press the [ENT/MENU] key to store the se-
lected level.
4. Press the [CLR/
9.3.7 RESET
The memories and settings of each setup category may be initialized inde-
pendently, or the transceiver may be reset to the original factory settings.
Press and hold [ ENT/MENU ] "CONFIG" "RESET"
1.
2. Press the [▲] or [▼] key to select the de-
sired category from: "CHANNEL", "CON-
FIG", or "ALL" ( all settings except the ATIS
code will be initialized ) .
3. Press the [ENT/MENU] key.
4. Press the [▲] key to select "OK?", then press the [ENT/MENU] key.
9.4 ABOUT...
Displays the version of the software currently operating on the transceiver.
] key to return to radio operation.
] key to return to radio operation.
Page 33
Publicité
