Publicité
Les langues disponibles
Les langues disponibles
9.2.2 EDIT
This selection is used to edit the FM Broadcast frequency and name.
Press and hold [ ENT/MENU ] "FM SETUP" "EDIT"
1.
2. Press the [▲] or [▼] key to select the
memory to be edited, then press the [ENT/
MENU] key.
3. Use the same procedure as described in steps 3 to 11 of "ADD" in the
previous section.
9.2.3 DELETE
This selection can delete the frequency data stored on an FM Broadcast memory.
Press and hold [ ENT/MENU ] "FM SETUP" "DELETE"
1.
2. Press the [▲] or [▼] key to select the
memory to be deleted, then press the [ENT/
MENU] key.
The delete confirmation screen will appear.
3. Press the [▲] or [▼] key to select "OK?" ( delete ) or "CANCEL" ( cancel ) ,
then press the [ENT/MENU] key.
9.3 CONFIG
9.3.1 KEY BEEP
This selection is used to select the beep tone volume level when a key is
pressed.
Press and hold [ ENT/MENU ] "CONFIG" "KEY BEEP"
1.
2. Press the [▲] or [▼] key to select the de-
sired level. The beep level can be set from
"1" to "5", or "OFF".
3. Press the [ENT/MENU] key to store the se-
lected level.
4. Press the [CLR/
] key to return to radio operation.
Page 31
Publicité
