Standard Horizon HX40E Manuel D'utilisation page 79

8.11 Listening to the FM Radio
The HX40 includes provision for FM broadcast reception.
1. Press the [◄] or [►] key to select the [RA-
DIO], then press the [ENT/MENU] key.
The FM broadcast coverage is 65.000 to
108.000 MHz ( 100 kHz step ) and utilizes
Wide-FM mode.
2. Press the [▲] or [▼] key to select the de-
sired frequency.
3. To exit from the FM Broadcast Reception mode, press the [ENT/MENU]
key to display the MENU screen. Press the [◄] or [►] key to select [CH],
then press the [ENT/MENU] key. The transceiver will revert to the chan-
nel in use prior to switching to the FM Broadcast band.
8.11.1 FM broadcast Frequency sweep operation
1. Recall the FM Broadcast Reception mode ( see above ) .
2. Press the [◄] or [►] key to select the [SWEEP] soft key, then press the
[ENT/MENU] key to start sweep operation.
Sweeping will proceed from the lowest to the highest frequencies ( step 100 kHz ) .
If the radio receives an FM station, the sweep will stop on the received frequency.
3. To cancel sweep operation, press the [CLR/
8.11.2 Store the FM frequency
1. While listening in the FM Broadcast receive
mode, select the desired FM frequency.
2. Press the [◄] or [►] key to select the [MEM]
soft key, then press the [ENT/MENU] key to
display the "ADD" screen.
3. Press the [ENT/MENU] key.
4. Press the [▲] or [▼] key to scroll through
the letters and choose the first letter of the
name for the FM frequency.
] key, the [▲] or [▼] key.
Page 25