Standard Horizon HX40E Manuel D'utilisation page 81

7. Press the [▲] or [▼] key to select a new
function to be assigned to the soft key, and
press the [ENT/MENU] soft key. Available
functions are listed below.
8. Press the [CLR/
Display
PRESET
HI/MD/LO
DW/TW
MEMORY
SCAN
NONE
8.12.2 Key Timer
1. Press and hold the [ENT/MENU] key.
2. Press the [▲] or [▼] key to select "CONFIG".
3. Press the [◄] or [►] key to select the [SELECT] soft key, then press the
[ENT/MENU] key.
4. Select "KEY SETUP" with the [▲] or [▼] key, then press the [ENT/
MENU] soft key.
5. Select "KEY TIMER" with the [▲] or [▼] key, then press the [ENT/MENU]
soft key.
6. Press the [▲] or [▼] key to select the de-
sired time, and press the [ENT/MENU] soft
key.
7. Press the [CLR/
] key to return to radio operation.
Programs or deletes the preset memory channel.
Selects transmit power.
Turns dual or triple watch scan ON/OFF.
Add or remove channels from memory channel scan.
Turns the scanning function ON/OFF.
No function.
] key to return to radio operation.
c
Function
c
Page 27