Standard Horizon HX40E Manuel D'utilisation page 74

8.8.2 OPERATION on a Preset Channel
1. Press the [◄] or [►] key to display the soft keys.
2. Press the [◄] or [►] key repeatedly, until
the [P-SET] soft key is selected at the bot-
tom of the LCD.
3. Press the [ENT/MENU] key, then press the
[▲] or [▼] key to select the desired preset
channel.
4. To return to the previous operation channel, press the [◄] or [►] key to
displays the channel. Press the [◄] or [►] key repeatedly, until the [P-SET]
soft key is selected at the bottom of the LCD. Press the [ENT/MENU]
key. The "P-SET" icon will disappear from the display.
8.8.3 Deleting a Preset Channel
1. Press the [◄] or [►] key to display the soft keys.
2. Then press the [◄] or [►] key repeatedly,
until the [P-SET] soft key is selected.
3. Press the [ENT/MENU] key, then press the
[▲] or [▼] key to select the preset channel
to be deleted.
4. Press the [◄] or [►] key to display the soft
keys, then press the [◄] or [►] key repeat-
edly, until the [P-SET] soft key is selected at
the bottom of the LCD.
5. Press and hold the [ENT/MENU] key until
the "P-SET" icon and channel number are
blinking.
6. Press the [◄] or [►] key repeatedly, until the [DEL] soft key is selected
at the bottom of the LCD. Press the [ENT/MENU] key to delete the chan-
nel from the preset channel memory.
7. To exit from the preset channels delete operation, press the [◄] or [►]
key repeatedly, until the [BACK] soft key is selected at the bottom of the
LCD, then press the [ENT/MENU] key.
Page 20