Publicité
Les langues disponibles
Les langues disponibles
After stopping the beep sound, the weather
alert reception confirmation screen will appear.
Press any key to display a confirmation screen.
The confirmation screen will ask whether to
move to the weather channel, or return to the
marine channel.
Press [ENT/MENU] to switch to the weather channel, or press the [►] key to se-
lect the [NO] soft key, then press [ENT/MENU] to return to the marine channel.
8.7.2 NOAA WEATHER ALERT TESTING
In order to test this system, NOAA broadcasts the 1050 Hz tone every
Wednesday sometime between 11 AM and 1 PM local time. You may use this
opportunity to test your transceiver periodically to confirm that the Weather
Alert feature is working, or for training crew members on how to configure
the transceiver to receive the NOAA Weather Alerts.
8.8 PRESET CHANNELS: INSTANT ACCESS
10 preset channels can be programmed for instant access. Press the [◄] or
[►] key to display the soft keys. Press the [◄] or [►] key repeatedly to select
the [P-SET] soft key. Pressing the [ENT/MENU] key activates the user as-
signed channel bank. If the [ENT/MENU] key is pressed and no preset chan-
nels have been assigned, an alert beep will be emitted from the speaker.
8.8.1 PROGRAMMING PRESET CHANNEL BANKS
1. Select the desired channel to be assigned into the Preset Channel Bank
using the [▲] or [▼] key.
2. Press the [◄] or [►] key to display the soft
keys.
3. Press the [◄] or [►] key repeatedly, until
the [P-SET] soft key is selected at the bot-
tom of the LCD.
4. Press and hold the [ENT/MENU] key until
the "P-SET" icon and channel number are
blinking.
5. Press the [ENT/MENU] key to program the
channel into the preset channel memory.
The "P-SET" icon will appear.
6. Repeat steps 1 through 5 to program the additional channels into the
preset channels. Up to 10 channels can be registered. If you attempt to
register an 11th channel, the error beep will sound.
Page 19
Publicité
