Standard Horizon HX40E Manuel D'utilisation page 76

6. Press the [▲] or [▼] key to select "M-SCAN"
or "P-SCAN".
7. Press the [ENT/MENU] key to store the selected setting.
8. Press the [CLR/
CH1001
CH88
CH1078
CH68
CH1061
CH1022
Memory Scan (M-SCAN)
8.9.3 SCANNING OPERATION
Memory Scanning (M-SCAN)
1. Set the scan type to "M-SCAN" in the SETUP menu ( refer to "8.9.2 SE-
LECTING SCAN TYPE" ) .
2. Press the [SQL/VOL] key twice, then press the [▲] or [▼] key until the
squelch background noise disappears.
3. Press the [◄] or [►] key repeatedly, until the [SCAN] soft key is selected
at the bottom of the LCD.
4. Press the [ENT/MENU] key.
"MEM SCAN" will appear on the display.
Scanning will proceed from the lowest to the
highest programmed channel number and
preset channel ( described in the next sec-
tion ) . Scanning will stop on a channel when
a transmission is received.
The channel number will blink during recep-
tion.
5. To stop scanning, press the [16/S] or [CLR/
Priority Scanning (P-SCAN)
1. Set the scan type to "P-SCAN" in the SETUP menu ( refer to "8.9.2 SE-
LECTING SCAN TYPE" ) .
2. Press the [SQL/VOL] key twice, then press the [▲] or [▼] key until the
squelch background noise disappears.
3. Press the [◄] or [►] key repeatedly, until the [SCAN] soft key is selected
at the bottom of the LCD.
Page 22
] key to return to radio operation.
CH09
CH12 CH1078
CH15
CH1018
CH1001
CH88
Priority Channel
CH68
CH1061
CH1022
Priority Scan (P-SCAN)
] key.
CH09
CH12
CH15
CH1018