Publicité
Les langues disponibles
Les langues disponibles
Figure 5: Telephone Connection
Figure 6: Power Supply and Supervision Wiring Diagram
Program the zone/point as "Supervisory" type with keypad only annunciation when in alarm. Do
NOT use a zone/point that is normally used for 2-wire smoke detectors. The power supervision relay
(RM-2 or RM1C) is only used when the 3G4010CF/LE4010CF is not powered by the control panel.
When the radio is powered by the control panel, the relay is not required since a loss of input power
will generate a signal to the CMC. Output 4 on the 3G4010CF/LE4010CF must be set as "Active
High" (default).
3G4010CF / LE4010CF Installation manual
34
Publicité
