Publicité
Les langues disponibles
Les langues disponibles
Installing the 3G4010CF/LE4010CF
The 3G4010CF/LE4010CF requires enrollment with C24 Communications to operate. For more
information, please visit www.connect24.com, contact C24 Communications customer service at
1-888-251-7458 (US) / 1-888-955-5583 (Canada) or contact the central station to inquire if they are a
C24 Communications Master Reseller.
Note: Enrollment with C24 Communications should be performed before turning on the
3G4010CF/LE4010CF unit. Before inserting or removing the SIM card, please ensure the unit is
turned off.
Step 1 - Initialize the 3G4010CF/LE4010CF with C24
Communications
To complete enrollment, a C24 profile, installer ID/PIN (or web credentials) and the 20-digit SIM
number are required.
Initialize the 3G4010CF/LE4010CF with C24 Communications by:
•
web - www.connect24.com
•
mobile - m.connect24.com
Note: The SIM activation process with the cellular carrier typically takes between five and ten
minutes to complete.
Step 2 - Determine best signal location
1. Remove the screws and the front cover of the 3G4010CF/LE4010CF metal enclosure [1].
2. Fit the antenna [2] (ensure that the bolt [3] is fastened tightly).
3. Connect the antenna to the 3G Radio [5] and ensure the connector is secure. Before inserting or
removing the SIM card, please ensure the unit is powered down.
4. Ensure the SIM card is placed in its socket [6].
5. Power up the 3G4010CF/LE4010CF module [4]Use a DC power source rated 12V/0.7A connected
to+/- 12V terminals [9]
Step 2a – SIM card is activated
When the SIM card is activated, the red LED is on solid, the blue LED is off and the signal strength
LEDs will display the average signal strength. In this state, the 3G4010CF/LE4010CF is registered to
the cellular network.
Red
ON
If the signal strength is too low (bottom signal LED off or flashing), the 3G4010CF/LE4010CF will
move to Step 3 and scan for carriers with sufficient signal strength and attach to the carrier. If the
3G4010CF/LE4010CF is connected to a carrier with sufficient signal strength (minimum of bottom
signal strength LED on solid), it will move to Step 4.
3G4010CF / LE4010CF Installation manual
Blue
OFF
Yellow / Green (high)
-
Yellow / Green (low)
-
13
Publicité
