Crosscall CORE-Z5 Mode D'emploi page 82

This function is particularly useful in situations where your power button is difficult to
access: on an X-BIKE, an X-CAR PRO, etc.
To enable/disable this function, go to Settings
Glove mode
Activating this mode will increase the screen's sensitivity so that you can use your
smartphone while still wearing your gloves.
1. Open the phone's notification panel by swiping down from the top of the screen.
2. In the white banner at the top of the screen, click on the
glove mode, which lets you use your smartphone and touch the screen even when
wearing gloves.
NFC
The NFC antenna of your CORE-Z5 is located on the upper-left section on
the rear of your phone.
Make sure to position this part of the phone correctly on contactless readers
(payment terminals, transport terminals, badge readers, etc.) for optimal
operation.
Battery sharing
With the CORE-Z5, you can now charge another phone or accessory using your battery
power.
This function is automatically activated when you connect a second phone or accessory
via a USB-C cable.
The Battery Share
• check that charging is in progress
• reverse the charging direction if necessary (in the case of two phones)
Charging animation
When your phone is charging, you can display the phone name and battery level using a
proximity sensor that detects the movement of your hand.
This feature is particularly useful in the case of a company that has a fleet of mobile
phones and uses the POWER STATION to charge the phones in its fleet: with a quick
wave of your hand, you can easily find your phone.
icon in your notification panel lets you:
80
> Screen > Screen wake.
icon to enable/disable