Crosscall CORE-Z5 Mode D'emploi page 61

ACTIVATING YOUR CORE-Z5
Installing the nano SIM/micro SD card
1. Check that your device is turned off. If not, switch it off by pressing the On/Off
button.
2. Eject the nano SIM/micro SD card tray using the tool provided, inserting it into the
hole designed for this purpose, as shown below.
3. Remove the tray completely.
4. You can insert 2 nano SIM cards and one micro-SD card into your phone.
a. To ensure optimal compatibility with operator services, insert your nano SIM
card, metal side down, in the smallest compartment (SIM 1).
b. If required, you can insert a second nano SIM card, metal side facing
downwards, into the middle compartment (SIM 2) and/or a micro SD card
(maximum 1024 Go) into the left compartment.
5. Slide the tray back into the phone.
a. Make sure the cards are properly aligned.
b. Check that the tray is properly aligned with the slot in the phone when you
slide it back in.
c. Insert the tray and push it in, as shown above.
Important: In order to guarantee that your smartphone is sealed and waterproof,
make sure that the tray is fully inserted and locked.
SIM 1
sim 1
SIM 2 SIM 1
sim 2 sim 1
59
MICRO SD micro sd SIM 2 SIM 1
sim 2 sim 1