Crosscall CORE-Z5 Mode D'emploi page 62

Switching the phone on and off
Press and hold the phone's On/Off button and wait a few seconds until the display
screen turns on.
When you switch on your phone for the first time or after performing a data reset, follow
the on-screen instructions to set up your device.
Once the phone is on, this button can also be used to:
• Lock/Unlock your touch screen with a single short press
• Access emergency calls, switch off, restart and stealth mode by pressing and
holding.
Tips and precautions for charging your battery
Never charge your phone using the X-LINK
connection together, as this could shorten the lifespan of your phone's equipment.
The battery is built into the phone and is not removable. Do not remove the battery
yourself.
1. Open the dust cap and connect the cable and AC adapter
supplied in your pack using the USB-A port. Then plug the
other end of the cable into the USB-C port on your phone.
2. Plug the mains adapter into an electrical socket.
3. When the battery is fully charged, unplug the phone from
the charger. First unplug the charger from the device, then
unplug it from the electrical outlet.
60
magnetic connection and the USB
TM*