Publicité
Les langues disponibles
Les langues disponibles
will show a pressure between 1 and 1.5 bar depending on the set-point) in order to
start using the hot water or steam function.
ATTENTION!
During the heating up of the groups, the 5 keys of each control panel will alternate
to be ON and OFF until group reaches set temperature. Then 5 keys will change
to permanent ON position.
9 - Coffee preparation
You can use any type of coffee. For optimal results, we recommend using mixtures
prepared for the preparation of espresso coffee since the grinding point will be
adequate. If the coffee comes out very quickly or very slowly, it will be necessary to
change the type of coffee for another fine or coarser grind and experiment with the
pressing according to our preferences.
The steps to follow are:
1.
You must have the machine connected. Place the filter holder (with filter) in the
group.
2.
The 5 keys of the keypad must be permanently illuminated, which indicates that
the coffee machine has reached the ideal temperature to make coffee.
3.
Press the XL key (continuous coffee output) of the keypad and let water through
the group. Perform this action before making coffee, eliminate waste and balance
the temperature for optimal service.
4.
The pan must be filled 3/4 of its capacity, once pressed.
5.
Clean coffee residues that have been deposited on the edges of the clay so that
the adjustment is perfect.
MAN.31 V13 MANUAL BARISTA T 2023_EN_ES_DE_FR.indd 15
MAN.31 V13 MANUAL BARISTA T 2023_EN_ES_DE_FR.indd 15
15
18/10/2023 11:23:27
18/10/2023 11:23:27
Publicité
