Publicité
Les langues disponibles
Les langues disponibles
ATTENTION!
The connection in single-phase mode of these machines will lead to high con-
sumption of electric current, sockets supporting 25 A for the model of 2 groups,
and 30 A for the 3 groups, are necessary. It is possible to limit the maximum
amperage by means of the software of configuration of the machine, limiting
the number of heating elements that work simultaneously (see section 12). The
power / amperage table based on the configuration of the number of heating
elements that work simultaneously is as follows:
BARISTA T
1GR
2GR Compact
2GR
3GR
7 - Hydraulic connection
First, we will connect the free end of the drain pipe supplied with the machine to the
previously installed general drain outlet.
In connection with the general network, a tap must be incorporated to interrupt the
flow of water to the appliance when necessary. Next, we will connect the flexible hose
(connection 3/8 "H) to the pump and to the water inlet of the network. In case a water
treatment system is installed, we will connect the hose to the outlet of said system.
ATTENTION!
Recommended water parameters for mains connection use:
T.D.S.
Total hardness
Total Iron
Free chlorine
Total chlorine
MAN.31 V13 MANUAL BARISTA T 2023_EN_ES_DE_FR.indd 13
MAN.31 V13 MANUAL BARISTA T 2023_EN_ES_DE_FR.indd 13
COFFEE
STEAM
TOTAL
(W)
(W)
AMP
230V 1P
1 x 1000
2 x 1000
15 A
2 x 1000
2 x 1000
19,5 A
2 x 1000
2 x 1750
24 A
3 x 1000
2 x 1750
29 A
POWER/CURRENT TABLE IN MODELS ONE/PLUS
90-150 ppm
70-100 ppm
0-0.02 ppm
0-0.05 ppm
0-0.1 ppm
CE PARAMETER
1
2
3
6,5 A
11 A
15 A
6,5 A
11 A
15 A
7,5 A
15 A
19,5 A
7,5 A
15 A
19,5 A
pH
6.5-8
Alkalinity
40-80 ppm
Chloride
0-30 ppm
Network pressure
0,1-1,0 MPa
Flow rate
8 l/min
4
5
6
15 A
15 A
15 A
19,6 A 19,5 A 19,5 A
24 A
24 A
24 A
24 A
29 A
29 A
18/10/2023 11:23:26
18/10/2023 11:23:26
13
Publicité
