Ascaso BARISTA T Manuel De L'utilisateur page 17

Les langues disponibles

10 - Programming dose of coffee

To program the amount of coffee, with the machine on and ready to make coffee (keys

of the keypad permanently lit), press the programming button XL for 5 or 6 seconds

until it is lit intermittently while the rest of the keys are illuminated in a fixed manner.

Then press the key of the selection you want to program, which is lit intermittently at the

same time that the other four keys are off. The erogation process begins.

Once the desired quantity has been obtained, press again the key belonging to the

selection you are programming. The dispensing process is stopped, and the key light

is OFF. Press XL button until all keys are ON except for this one, and then press it

twice until machines gets back to working mode. You can also wait for 30 seconds so

machine gets back to working mode automatically.

ATTENTION!

In machines of 2 and 3 groups, when programming the left group, they are

automatically programmed with the same volume parameters located to the

right of this. You can program different selections at once, without getting out

of programming mode. Just follow same steps with the different selections you

need to set.

If you want to get coffee at will (continuous), press the XL key. When you get the

desired amount, press again to interrupt the delivery.

ATTENTION!

The BARISTA T PLUS model has a semi-automatic switch that activates the

delivery of coffee manually.

MAN.31 V13 MANUAL BARISTA T 2023_EN_ES_DE_FR.indd 17

1 espresso

1 lungo

2 espressos

2 lungo

continuous

(press

again to

discontinue

the dose)

18/10/2023 11:23:27