Installation
Accessories
Depending on the model that you have purchased, you are supplied with several
accessories that can be used in a variety of ways.
01
02
NOTE
DO NOT operate the microwave oven without the roller ring and turntable.
8 English
01 Roller ring, to be placed in the centre of
the oven.
Purpose: The roller ring supports the
turntable.
02 Turntable, to be placed on the roller
ring with the centre fitting to the
coupler.
Purpose: The turntable serves as the
main cooking surface; it
can be easily removed for
cleaning.
Installation site
A
B
C
D
A. 20 cm above
B. 10 cm behind
C. 10 cm on the side
D. 85 cm of the floor
Turntable
• Select a flat, level surface approx. 85 cm
above the floor. The surface must support
the weight of the oven.
• Secure room for ventilation, at least 10 cm
from the rear wall and both sides, and 20
cm from above.
• Do not install the oven in hot or damp
surroundings, such as next to other
microwave ovens or radiators.
• Conform to the power supply specifications
of this oven. Use only approved extension
cables if you need to use.
• Wipe the interior and the door seal with a
damp cloth before using your oven for the
first time.
Remove all packing materials inside the
oven. Install the roller ring and turntable.
Check that the turntable rotates freely.