Basic Procedures - Use - Mondolfo Ferro AAS 924 Manuel D'utilisation

8. BASIC PROCEDURES - USE

CRUSHING HAZARD:
Some parts of the machine, such as the demounting/
mounting head, the bead breaker, the turntable and the
titling column move during operation and may constitute
potential crushing hazards.
Keep hands and other parts of the body well away from
moving parts of the machine.
RISK OF IMPACT:
Tilting the manipulator arm can create the potential
risk of impact with parts of the body.
The tilting operation must be performed in position B
AVOID PHYSICAL INJURY
Before carrying out any mainten-
ance on the machine:
1. Make sure that the machine is
in a stable configuration with the
horizontal axis fully retracted and
AS 924 - AS 924 A Operator's Manual
CAUTION
CAUTION
the column in the working or stand-by posi-
tion (Fig. 12c).
2. Disconnect the power cable (Fig. 12a).
3. Isolate the compressed air line disconnect-
ing the closing valve (quick-release connector)
12c
(Fig. 12b)
12a
12b
UK
97