Tyre Inflation - Mondolfo Ferro AAS 924 Manuel D'utilisation

Noise levels as high as 85db(A) may be reached during this operation.
Therefore operators are advised to wear hearing protection devices.
It is recommended that protective eye-wear is worn to prevent any injury
resulting from contact with dust or any fragments inserted in the tyre
A bursting tyre can cause projections of its parts in surrounding areas with a force
sufficient to cause serious injury or death.
Do not mount a tyre if its dimensions (indicated on the side) do not correspond
exactly with the rim dimensions (printed inside the rim) or if the rim or the tyre are
defective or damaged.
Never exceed the pressure recommended by the tyre manufacturer.
The tyre changer is not a safety device and does not prevent tyres and rims from
exploding. Keep other people at a distance
8.8.b. TYRE INFLATION
- Ensure the wheel is NOT clamped on
the turntable by the clamps (Fig. 30).
- Bring the horizontal arm to the
centre of the wheel (fully extracted
towards the operator)
- Lower the vertical arm to touch the
rim (fig. 31), then lock the arm in this
110
CAUTION
DANGER
YES
position (fig. 31a).
- Remove the valve core if it has not already
been removed (Fig. 32).
31
AS 924 - AS 924 A Operator's Manual
NO
31a
30
32