We do not recommend using inflation devices (e.g. gun) connected to compressed
air sources other than the machine.
Always comply with the national safety regulations, which may be more restrictive
with respect to this manual, following the principle that the more restrictive standard
takes precedence over the less restrictive one.
If the operating pressure of the tyre envisaged
for a certain vehicle exceeds the value of the
inflation limiting valve, it is recommended that
the tyre/wheel assembly s placed in a suitable
safety device.
Look carefully for any tyre damage. The following instructions must be read, under-
stood and observed precisely.
1. Tyres that are excessively inflated could explode, causing the dispersion of debris in
the air, which can cause accidents.
2. Tires and Rims that are not the same diameter are "mismatched". Never attempt to
mount or inflate any tire and rim that are mismatched. For example, never mount a 16"
tire on a 16,5" rim (or vice versa). This is very dangerous. A mismatched tire and rim could
explode, and resulting in an accident.
3. Never exceed the inflation pressure recommended by the tyre manufacturer.
Carefully check that the air hose is well inserted in the valve.
4. Never bring your head or other body parts close to a tyre during inflation or bead
insertion operations.
This machine is not a safety device against the possible explosion risk of tyres, air
chambers or rims.
5. Maintain a suitable distance from the tyre changer while inflating. Do not approach it.
AS 924 - AS 924 A Operator's Manual
DANGER
CAUTION
DANGER
CAUTION
UK
109