Mondolfo Ferro AAS 924 Manuel D'utilisation page 112

35a
(fig. 35a).
- Remove the valve core if it has not already been removed (Fig. 36).
- Connect the air hose Doyfe inflator connector to the valve stem (Fig. 37).
To increase the effectiveness of the air jets, manually lubricate and lift the lower
bead before activating the nozzles.
- Fully depress the inflation tyre briefly (fig. 38). The tyre expands, pushing the beads into
the seating position.
To improve the operation of the tubeless tyre inflation system the line pressure must
be between 8 and 10 bar.
- Release the wheel from the grippers.
- Bring the inflation pedal to the intermediate position (fig. 39) to inflate the tyre. Check
the pressure gauge frequently to ensure that the pressure NEVER exceeds the maximum
pressure specified by the tyre manufacturer.
112
36
CAUTION
CAUTION
38
AS 924 - AS 924 A Operator's Manual
37
39