Panasonic PRO LINE AG-5710P Manuel D'utilisation page 35

RS-232C specifications
М Other commands
Send Receive data returned
command Description of operation Data sent from PC | from VTR WR
t command | ee Counter reset comman [STX] CRT [ETX] [STX] CRT [ETX]
Counter calibration command. The
counter is reset after the tape has [STX] CCL [ETX] [STX] CCL [ETX]
been rewound to the start.
Command which checks whether
communication has been established
(whether the interface is working).
When trouble has occurred in the VTR,
NACK is returned; when the VTR is
operating properly, RCK is returned.
ferencing th
m EE erencing the: mode! [STX] QID [ETX] [STX] AG5710P [ETX]
Note:
If any key on the main unit or remote control or if a memory/search button is operated while the CCL command is
being executed, the CCL operation will not be performed properly, and processing will be aborted. Do not
operate these keys or buttons while this command is being executed.
With normal operation:
[STX] ВСК [ETX]
When trouble has occurred:
[NACK]
[STX] RCK [ETX]
Ш Counter display and editing accuracy
Bear in mind that the counter value may be slightly off when an operation accompanied by a change in
mode such as from CUE to REV, REV to CUE or REV to PLAY has been performed.
35