Panasonic PRO LINE AG-5710P Manuel D'utilisation page 29

RS-232C specifications
Send Receive data returned
Description of operation Data sent from PC
озо | Command which controls playback] which controls playback). |... о]
EEE speed in the positive (—) direction. [STX] OSU [ETX] [STX] OSU [ETX]
UP) —9, -7, —5, —1, —1/5, -1/10, –1/30, SLOW PAUSE, «1/30, «1/10, +1/5, +1, +5, +7, +9
OSD command
Each time the OSU command is sent, the speed is changed in the positive (—) direction by one
setting. Leave an interval of at least 150ms before sending this command for the second and
subsequent times. When the maximum positive speed («9x normal speed) is reached, the
speed cannot be changed any further.
Ш INSERT COMMAND
ta returned
Send Description of operation Data sent from PC Recelve data retur
| command | | _ fomVTR — VTR
EN — | Insert pre-processing command. | Insert pre-processing command. If this | 77] ENSEM
(INSERT) command is sent when the cassette's [STX] EIN [ETX] [STX] EIN [ETX]
tab has been broken out, the tape mark
flashes and a warning tone is emitted.
Audio dubbin re-processin
command. |f he ӨЛ Аа is ж. [STX] EAD [ETX] [STX] EAD [ETX]
when the cassette's tab has been
broken out, the tape mark flashes and
a warning tone is emitted
Command which executes insert up to [STX] EIT: 000
the specified position. When the a [ETX] [STX] EIT [ETX]
position specified by data is reached,
i i o n i Counter data
the insert operation is ended, and play | ==="
pause mode is entered.
Fl oL UD
DM
Sign Hour Minutes Seconds Frame
|
—:- sign
+: blank
Example:
Insert up to 1 hour 12 min. 35 sec. 00 frame
[STX] EIT : _ 1123500 [ETX]
t
A blank must be input here.
Note: The counter must be reset before sending the EIT
command.
Command which executes audio [STX] EAT : DOC i
dubbing up to the specified position. 0000 [ETX] [STX] EAT [ЕТА]
When the position specified by the
data is reached, the audio dubbing is Counter data
; [l LD) ГГ] DO DD
знай ач pray: paso MOUE: de Sign Hour Minutes Seconds Frame
—:- sign
+: blank
Example:
Audio insert up to 1 hour 12 min. 35 sec. 00 frame
[STX] EAT : _ 1123500 [ETX]
t
A blank must be input here.
Note: The counter must be reset before sending the
EAT command.
Note:
When the insert operation is activated using the EIN command, it will be cut off at the "0:00.00" counter setting.
29