Panasonic PRO LINE AG-5710P Manuel D'utilisation page 19

Automatic functions
OTR (one-touch timer recording)
OTR is a function for recording input signals for up to
a 24-hour period.
Preparations:
e Insert a cassette with
prevention tab intact.
its accidental erasure
(If a cassette tape has
already been inserted, press the POWER button to
turn on the unit's power.)
e Select 2H (standard mode) or 6H (triple mode) as
the desired speed using the RECORDING 2H/6H
button.
Cassette
Example: OTR from 8:02 PM to 8:30 PM
19
OTR procedure:
The time display changes in 1-minute increments
when the ONE-TOUCH TIMER REC ON [+/-] buttons
or OFF [+/—] buttons are pressed. When the buttons
are held down, the time display changes in 10-minute
increments. '
1. Press the ONE-TOUCH TIMER REC ON [+] or [-]
button to set the OTR start time.
Omit this step if OTR is to be started immediately.
eif a cassette with its accidental erasure
prevention tab broken out has been inserted,
"Ei" flashes and an alarm sounds to announce
that recording is not possible.
2. Press the ONE-TOUCH TIMER REC OFF [+] or
[-] button to set the OTR end time.
e |f, once the OTR start time has been set, the
ONE-TOUCH TIMER REC OFF [+] or [-]
button is not pressed within 8 seconds to set the
OTR end time, the start time will be cleared and
the normal display restored.
When OTR is completed, the power is automatically
turned off.
Notes:
e Press the POWER button to suspend OTR.
€ The OTR start or end time can be changed before
recording starts.
e The OTR end time can be changed during
recording.
e Do not allow the OTR function to overlap a
programmed timer recording. OTR always takes
precedence over a timer recording.
€ The OTR setting times cannot be checked.
ө Once OTR has been set, the present time cannot
be checked.