Publicité
Les langues disponibles
Les langues disponibles
Parts and their functions
© S-VIDEO IN connector
Use this for connection with another VTR or a TV
set equipped with an S-Video output connector.
-
Ф S-VIDEO OUT connector
Use this for connection with another VTR or a TV
set equipped with an S-Video input connector.
RS-232C connector
Editing between
two VTRs
can be conducted
speedily and efficiently by connecting the editing
controller (АС-А571) purchased separately to this
connector.
The
unit can
be operated
from
a personal
computer by connecting it to the computer using
the RS-232C cable which is also sold separately.
Note:
Do not turn on the VTR's power until the RS-232C
cable has been connected.
AUTO REPEAT switch
Set this to ON for auto repeat playback.
Note:
The SENSOR
REC
switch must be set OFF.
Also, use the DISPLAY button to set the display to
"clock display" or "counter display."
SENSOR REC switch
Set this to ON for sensor recording.
RS-232C setting switches
Use
these
switches
to
set
the
RS-232C
communication parameters.
Publicité
