Publicité
Les langues disponibles
Les langues disponibles
RS-232C specifications
|
Ш Power supply functions
Send
Receive data returned
Description of operation
Data sent from PC
РОМ
|
Power
| Power ON/OFF command.
command.
Power ON/OFF can be controlled bs
[STX] POW [ETX]
[STX] POW [ETX]
toggling.
M Reading of statuses
Send
И
š
Receive data returned
Description of operation
Data sent from PC
QOP
Command
which
asks
for
the
(OPERATION | operation mode of the VTR. The VTR
[STX] ООР [ETX]
[STX] OCC] [ETX]
MODE)
returns
one
of the
codes
in the
following table when it receives this
command.
Operation mode of VTR
Operation mode of VTR
| Code |
POWER OFF
CUE
STOP
REV
EJECT
SLOW
REWIND
SLOW PAUSE
FAST FORWARD
PLAY TO FRAME
RECORD
INSERT VIDEO TO FRAME
REC PAUSE
INSERT AUDIO TO FRAME
AUDIO DUBBING
;
INSERT AUDIO & VIDEO TO FRAME
A-DUB PAUSE
COUNTER CALIBRATE
PLAY PAUSE
PLAY
INSERT
REVERSE PLAY
INSERT PAUSE
DIRECT SEARCH
AUDIO & VIDEO INSERT
AUDIO & VIDEO INSERT PAUSE
When the QOP command is executed:
è All commands except SMC, SMF, QOP, QOS, QCD, QID, CRT and RCK are commands which accompany
VTR mode transition.
When QOP is executed immediately after a command is sent, the previous mode is
returned from the VTR since the processing inside the VTR was not entirely completed.
This means that an
interval of at least 300ms, which is required for the mode transition, must be teft before sending the QOP
command for the second and subsequent times.
32
Publicité
