Panasonic PRO LINE AG-5710P Manuel D'utilisation page 26

RS-232C specifications
The following functions can be controlled by using the
RS-232C interface adapter.
Ш Basic operations
EJECT INSERT
POWER ON/OFF SEARCH PAUSE
STOP SEARCH SPEED UP
PLAY SEARCH SPEED DOWN
REC/PLAY FORWARD/ADVANCE
FF REVERSE/ADVANCE
REW REVERSE/PLAY
PAUSE POWER/ON
AUDIO/DUB POWER/OFF
COUNTER RESET DIRECT SEARCH
(+1/30, +1/5, +1, +5, +7)
i Simple editing function
Video/audio/audio-and-video insert editing can be
conducted as far as a specific frame position.
Ш Search function
The position of a specific frame can be searched.
Ш Checking of statuses
The present VTR mode and interface status can be
checked.
B Other
e On-line check
e Counter calibration
1. Hardware specifications
(1) Interface specifications
Connector: D-Sub 25-pin DCE specifications
И ИС
26
Example ої wiring connections
(2) Communication parameters
This unit's communication parameters are set to
9600 bps (baud rate), 7 bits (bit length), 1 bit
(stop bit) and odd parity. .
Ensure that the communication parameters of
your personal computer match the settings listed
above. If the unit's parameters need to be
changed, they can be changed as shown below
but your dealer must be consulted about this
before the changes are made.
Ш Setting the baud rate
RTE
Гон [2500 ps
B Setting the communication parameters
Bit
Length
SW 1
2. Software specifications
(1) External interface specifications
| Communication system ASYNCHRONOUS FULL DUPLEX
Bit length
8 BIT/7 BIT
W The factory settings are 9600 bps, 7 bits, 1 stop bit
and odd parity. |
№ The unit's receive buffer has a 128-byte capacity.