Panasonic PRO LINE AG-5710P Manuel D'utilisation page 17

Simple recording
Adjusting the Hi-Fi audio recording level
Normally, the Hi-Fi REC LEVEL control is kept at the
"5" position which is the middle of the range. Adjust it
in such a way that the audio level display is set to +4
dB at the peak.
@ The level is automatically adjusted for normal
sound.
Sensor recording
1. Set the SENSOR REC switch to ON.
SENSOR
ВЕС,
ON
ae |
(Rear panel)
2. Press the POWER button to turn off the power. |
Check that the POWER indicator is off.
3. When video signals (LINE input) are supplied, the
unit's power is automatically turned on, and
recording starts. As soon as the video signals are
no longer supplied, recording is stopped and the
unit's power is turned off.
(Auto repeat recording)
Recording will continue to the end of the tape unless
the video signals are cut off. When the tape comes to
the end, it is rewound to the beginning, and recording
commences again.
Concerning the accidental erasure prevention tab
Accidental erasure prevention tab
To prevent
accidental erasure To re-record
Cover the hole with
adhesive tape.
Break out the tab using a
screwdriver.
17