Wilo CronoLine-IL-E Notice De Montage Et De Mise En Service page 133

11.6.3 Navigation
±
1.0.0.0
±
2.0.0.0
4.0.0.0 4.1.0.0
5.0.0.0 4.2.0.0
4.4.0.0
Fig. 43: Example navigation
11.6.4 Changing selection/settings
±
5.6.3.0
12.3
Fig. 44: Changing settings and returning to
the "Selection/settings" menu element
±
2.0.0.0
12.3
Fig. 45: Changing settings and returning to
the status page
Installation and operating instructions • Wilo-CronoLine-IL-E, Wilo-CronoTwin-DL-E, Wilo-CronoBloc-BL-E • Ed.01/2024-02
• Change to menu mode (see "Changing to menu mode" chapter).
Carry out general menu navigation as follows (see example navigation): During naviga-
tion, the menu number flashes.
• To select the menu element, turn the operating button.
The menu number is increased or decreased. The symbol of the menu element and the
setpoint or actual value are shown if necessary.
If the downward-pointing arrow for "Level down" is displayed:
• To change to the next menu level down, press the operating button.
The number of the new menu level is displayed, e.g. when changing from <4.4.0.0> to
4.4.1.0
<4.4.1.0>. The symbols for the menu element and/or current value (setpoint, actual value
or selection) are displayed.
4.4.3.0
• To return to the next highest menu level, select the "Level up" menu element and
press the operating button.
The number of the new menu level is displayed, e.g. when changing from <4.4.1.0> to
<4.4.0.0>.
To change a setpoint or a setting:
• Navigate to the desired "Selection/settings" menu element.
5.6.3.0
The current value or status of the setting and the associated symbol are displayed.
300
S
• Press the operating button. The symbol representing the setpoint or the setting
flashes.
5.6.3.0
10
• Turn the operating button until the desired setpoint or setting is displayed. For an
S
explanation of the settings represented by the symbols, see table in the "Reference menu
element" chapter.
• Press the operating button again.
The selected setpoint or setting is confirmed, and the value or symbol stops flashing. The
display is back in menu mode with the menu number unchanged. The menu number flashes.
2.0.0.0
2.0.0.0
2.0.0.0
NOTICE
If the operating button is pressed for 2 seconds while a "Level up" menu
element is selected, the display jumps back to the status page.
NOTICE
When values in <1.0.0.0>, <2.0.0.0> and <3.0.0.0>, <5.7.7.0> and
<6.0.0.0> are changed, the display jumps back to the status page.
en
133